Lighting Wedding Reception Toasts with Off Camera Flash EXPLAINED
Receptions are full of emotion — the laughter, the tears, the heartfelt stories — and the toasts are often some of my favorite moments to photograph. But capturing them beautifully can be tricky when you’re dealing with dim, mixed lighting and unpredictable speaker positions. That’s where off-camera flash comes in.
Today, I’m breaking down exactly how I light wedding reception toasts using a simple and effective off-camera flash setup that’s fast to deploy and gives me stunning results every time.
1. Start with the Scene in Mind
Before anything else, I take a few seconds to observe the room. Where are the speakers standing? Where is the couple sitting? How far apart are they? My goal is always to balance clean, flattering light on the subject while maintaining the warm ambiance of the venue.
I never want to blow out the candles or wash away that romantic reception glow — I just want to enhance it.
2. My Off-Camera Flash Setup
For this setup, I typically use two off-camera flashes: one aimed at the person giving the toast, and another softly lighting the couple’s reaction. Both are on light stands with MagMod modifiers or small softboxes to diffuse the light and make it look natural.
If I can’t place a flash directly facing the speaker (for example, due to tight spaces or guest tables), I’ll bounce it off a nearby wall or ceiling. This gives me beautiful, directional light that still feels organic.
I usually keep my camera flash off during this part to avoid harsh, flat lighting. Instead, all the magic happens with my two strategically placed off-camera lights.
3. Camera and Flash Settings
My go-to camera settings for toasts are usually around 1/160 sec, f/2.8, ISO 800–1000, depending on the venue lighting. The flash power is typically low — around 1/32 or 1/64 — just enough to lift the subject without overpowering the ambient mood.
If you’re shooting mirrorless, make sure your EVF preview doesn’t mislead you when using flash; sometimes it helps to turn off exposure simulation so you can properly see what you’re capturing.
4. Keep the Emotion Front and Center
One of the biggest mistakes I see photographers make during toasts is focusing too much on the technical and not enough on the emotion.
Yes, get your lighting right — but don’t forget to move around. Capture the speaker’s laughter, the couple’s tears, the parents’ reactions. The lighting should support the story, not dominate it.
My favorite angle is usually over the speaker’s shoulder, showing the couple’s faces reacting to the speech. With the right backlight from one of my flashes, that shot absolutely glows.
5. Bonus Tip: Color Balance Matters
Because reception spaces often have warm tungsten or fairy light tones, I’ll gel my flashes with 1/4 or 1/2 CTO gels to match the ambient color. That way, the light feels cohesive and natural in-camera — saving me time in post-production later.
Final Thoughts
Lighting wedding reception toasts doesn’t have to be intimidating. With just two off-camera flashes, some smart placement, and attention to the moment, you can create images that feel cinematic and real.
The next time you find yourself shooting in a dimly lit ballroom, take a breath, set your lights, and focus on capturing the emotion — because that’s what couples will remember forever.
📸 WATCH THE FULL VIDEO HERE: https://youtu.be/aQovFObTD8M
Are you ready to stop guessing and start growing your photography business with proven strategies?
My Mastermind program is designed for photographers who want to scale, find freedom, and build a business they truly love. Inside, you’ll get personalized coaching, step-by-step guidance, and the community support you need to thrive.
See if it’s the right fit for you: https://www.breatheyourpassion.com/photo-insiders-mastermind-optin
